Going to take the FZS1000 to Llandow for a track day with the SouthWest Bikers crew. We may have places available if anyone wants to play???
  Have the bike in the workshop for fettling - will fit decent rear shock off a B-King - not sure what to do to uprate the front suspenders for track days. USD conversion will be a pain, what can be done with the stock front end?

When you guys check your valve clearances do you have  special feeler gauges? mine and new one i can find are to broad to check the middle of the three on the inlet side, do these have to be genuine yam tools?

Simple question, any recommendations for brighter headlight bulbs for a 2010 FZ6 Fazer?

Foccers fountain of knowledge being tested again....
The soil in our garden is clayey topsoil about 8 inches thick overlaying solid orange clay. The topsoil holds water in the top couple of inches....it doesn't drain vertically or down the slight slope of the garden.
I know I need to improve the soil structure with organic material to get it to drain. So the fist question is any experience of electric or petrol rotovators? I don't want to spend a fortune because that means less on the nice things in life!
Also reading about adding gypsum to the soil as a dressing as it improves the structure of the clay to aid drainage.....anyone done this? I'm learning that builders plaster is essentially gypsum and about a quarter of the price of agricultural gypsum at garden centres!!
I have already dug some drains but need to get the water travelling within the soil to reach the drains.
The area of lawn is around 10 x 5 m

So..... thoughts please.

Bits from my old Fazer which I wrote off :'( .

• Carburetor rubber links x4
• Crank Case cover: Near brand new, bought and replaced just before crash.
• Fuel pump + pipes
• Steering Yoke.
• Pillion Foot rests + gear change lever
• Starter mortor
• Fuel catch/panel
• Plastic side panel
• Rocker Covers x4
• Coolant pump.
• Crash Bung Frame Fixtures
• Electrical Box 1
• Side Stand
• Cable 1
• Cable 2
• Electrical Box 2
• Coolant Reservoir
• Fuel spill catcher rubber
• Wing Mirror Rubber
• Airbox
• Various Clips, Fixtures and rubbers

Scooby from York

Hello,
Just purchased a Fazer.Starts ok but when you switch on all lights it cuts the engine out.  :'(

Hi
I seem to remember but forget who, someone sometime ago was making LED rear lights for a gen 1 Fazer, just wondered if he still did and who is he? thanks,

https://youtu.be/V7geXAAZ4Uo

hi all need bit help here
I bought 2004 fazer 1000 and rear tyre was dead so I order and new one 180/55/17 when I took the wheel off old tyre was 190 /50/17  :eek  so I look in workshop mannul and it say 180/55/17 so I thought some one has put the wrong size on the wheel so I took it to my local garage they took old one off and put new one on call me over and show me that's the new tyre was to small for the rim and I need 190 he said it could be r6 wheel and it was  modified  for my bike  :\  has any one has same problem as me any help ? Thanks