Hi guys probably a dumb ass question but will a '99 tank fit a '98, cheers.

http://pages.ebay.com/link/?nav=item.vie...49&alt=web

Anyone had success at fixing the "locating" tab on the Right Handlebar Switch cluster, that also has the throttle cables


Just removed mine to remove the throttle cables to get carbs out and its cracked and fell off, can only see units with no light switches on ebay, i may have to transfer things around if i buy one, but strange i can see not many with the right configuration..

Hi All,


Need to take camshafts out as clearances are out of spec, have the cover off and cam chain tensioner released, but haynes manual and service manual say to remove the exhaust side cam chain guide, with pliers..


I cam move it a little bit, and pull it upwards a few cm, but it feels like it will need a fair old tug to get out, anyone had any issues, do not want to use too much force and break somete...




Anutz

Hello.. I wanted to change the stock big orange indicators today with some LED Oxford ones but I ran into problems.. Im not sure what exactly I did but it stopped working (only the right front one .. all the others work fine.) I tried to put it back together with the stock one but still doesn't work anymore..


Im ataching pictures of the indicator .. they come with some resistor aswell but im not sure if i need one... the stock bulbs are 10W ... I also checked the fuses on the throttle side under the seat...neither seemed blown... Please help . Thanks!

Attached Files

  1.jpg (Size: 114.91 KB / Downloads: 38)
  2.jpg (Size: 59.89 KB / Downloads: 40)
  3.jpg (Size: 168.26 KB / Downloads: 38)

Hi all
As title says, I'm interested in knowing what you guy's wear when riding? As i have come from riding a gsxr750 to now riding a fz6 i ride in 2 piece leathers matching boots gloves and lid.  But am thinking about going down the retro look with open face lid, As Think full leathers don't look right on this bike.

Hi I am wanting to fit Fat bars to my gen 1 which ones fit well ?

Help needed. Just bought a rieju rs3 50 nkd for my lad. Got it cheap cos it needs a few bits doing. Its a 2014 model with under 3k on the clock. Most of the bits are easily sorted out except one. I need a new rear brake disc, it is fitted with galfer waveys as standard and rieju want £155 for a disc :eek.
Anyone got any idea of a generic disc or supplier of that  could be used instead?
I know its 220mm diameter but not sure of bolt hole centres etc as I haven't removed it yet.
I'm not fussed if its just a plain disc, don't need owt fancy, any ideas anyone?
Thanks for reading, Neil.

Hi all, I've just done the TRX rear brake caliper upgrade and I'm very pleased with the result - excellent rear braking efficiency and superb sensitivity. My one concern is that the TRX torque arm doesn't line up accurately between the hanger and the swing arm mounting points. To get it to fit I had to force it on and therefore it must be under some sideways stress. Any comments or suggestions would be welcome.

Bit of a long shot but I was just wondering if anyone had bike Sat nav I could borrow for next weekend, I'm going to a wedding in the middle of know here just outside Stratford upon Avon so getting there will be a hell of alot easier with one!! Odd question I know but worth a punt!!
Thanks as always !
Toby