[color=rgb(20, 20, 20)]As well as the changes to the penalties for using a mobile device, from April the penalties for speeding will increase. 3 bands where the minimum fines will be calculated from your weekly earnings:[/size][/color][color=rgb(20, 20, 20)][/size]Band A = 50% of your weekly earningsBand B = 100% of your weekly earningsBand C = 150% of your weekly earnings






https://www.carkeys.co.uk/news/speeding-...ns-for-you[/size][/color]

Renntec Rack for Gen 1 Fazer 1000


Fixings all included.


Bought from a fellow FOC'er about 2 years ago and have never fitted it. Used but good condition.


Delivered to your door for £60


Thanks
Lewis

Attached Files

Thumbnail(s)
   

Yamaha Paddock Jacket


Size XL


I am 48" chest and this fits well.


Barely worn in all honesty


Delivered to your door for £30


Thanks
Lewis

Attached Files

Thumbnail(s)
   

I'm trying to find out the standard length of a gen2 front brake lines if they come straight from the master?
Don't suppose one of you lovely foccers with a gen2 that has standard bars could measure them for me?  Or anyone know the length anyway?
I'm wanting to replace my current ones but I have Rizoma bars that are lower than the stock ones and the lines I have on are way too long but I don't know if they are for the fz1 or not. I don't want to buy another set that are too long haha

Needed to change the rear disc on the Gen 2 FZ1 and had been warned that it can be difficult to get the bolts undone.....

So soaked the threads in Plus Gas, froze the bolts (instead of warming the hub) to shrink them down, tapped them with large diameter pin punch to upset them and then tried to undo them...

2 undid ok, 2 T40 heads snapped off flush in the bolt heads and couldn't be removed, the other snapped off but did come out. What to do as the T40 heads are too hard to drill?

So welded M16 nuts to the bold heads and they undid fine with no damage to the hub (serious thermal shock helped). Not sure what else I could have done - may also work for the front discs as I've heard that the whole wheel gets thrown away if they can't get the bolts out.

The design of the bolt heads is wrong - the ratio of the T40 diameter to the bolt diameter means if the bolt is at all seized it's then very likely the T40 will fail - I used reasonably quality T40 heads...

Attached Files

Thumbnail(s)
       

SOLD

Sargent rider's seat - WS-562F

Black with black piping - goes with all bike colours.  In excellent condition

Fits Yamaha FZ1, FZ1-S - 2006 onwards (was fitted to my 2010 FZ1-S)

http://www.sargentcycle.co.uk/acatalog/y..._only.html & http://www.sargentcycle.com/Seats-Access...2F-19.html for manufacturer's details.

A big upgrade on the standard Yamaha seat and well worth the asking price of £150 inc P&P

Attached Files

Thumbnail(s)
       

[color=rgb(51, 51, 51)]Hi All,[/color][color=rgb(51, 51, 51)][/size]I have just changed my rear brake pads on my FZ1 and bled the system afterwards. The issue I now have is there is no feel at all in the pedal. When bleeding there was no bubbles in the line at all but after spending a hour on it, it is no better. I have noticed when operating the pedal the caliper moves/rocks from the piston side, is this normal ? as I've only just noticed it after trying to troubleshoot my issue. Both caliper mounting bolts are in and torqued up correctly and I have fitted the shims off the old pads but also tried the pads without them either way doesn't make a difference. Any advice would be a great help.[/color]

hi all
I have got gen 1 fazer 1000 year 2004 .
I getting the bike ready for new biking year I bought this bike late last year I only rode it 6 miles to mot  station and back so I not sure how these bikes runs like it feel fine .
Ok back to my question I downloaded instructions do to the tps adjustment but I getting  3,000 not 0 or 5000 or 10000 and I have manually adjust angle of the sensor  but no luck :o  .
So my question is sensor faulty do I need to get another one as it rides fine and no fault when I reconnect the sensor coupler ?
Thanks for your help people

hi
have this for sale on evilbay,
if anyone here is interested will sell for £190 including postage
cheers

http://www.ebay.co.uk/itm/142302013909?s...1558.l2649

What do people use to clean them up?  I'm after something that hopefully doesn't include hours of arm ache as my fibromyalgia won't allow for that   Any magic potions out there?