Hello from Wiltshire, bought my first Fazer today,now waiting for delivery on Saturday ?

Attached Files

Thumbnail(s)
   

I can't get a sprocket 1 tooth bigger (17 tooth) for my tracer 700 which is the same as the MT-07.
standard tooth is 16.
I can how ever get a R1 17 tooth sprocket which is the same except its slightly narrower .
the thicker part..... the MT-07 is 11.0mm ---R1  10.8mm
the MT-07  chain 525 R1  530
would this make any difference??
hopefully someone can help me on this,even if the above is not suitable maybe you'll know where I can get it.
in the usa I can get it but postage combine comes to £60 or more .
how can they justify £32 postage??.

I need to adjust the clutch cable on my FZ6, but the adjuster by the clutch lever is already all the way out.

The Haynes manual says to remove the tank, battery and airbox to get access to the other adjuster which is down between the frame and the engine, but I don't want to have to do all that if I don't have to.

If I lift the tank I can see the adjuster, but there's not enough gap to get tools into the space.

So does anyone have any suggestions to sort this out without all the palaver of removing the battery and airbox?

Looking for a blue spot rear caliper complete and ready to fit in good working condition. Let me know if you have anything. Replacing the weathered one on my commuter.


Cheers

Hi all.
Damn my poor memory.... :'(


I fitted uprated headlights.
Removed the fairing inners and the rear fairing bolts to get at them.
Now lost one of the silver fairing bolts, but got the square nut it fits with!! :oops


I'd just like to know the size/type of bolt to order to replace it?


Any/all help appreciated

sorry gents should have put workshop manual not user in the earlier post

Hi after having a clear out I found my old 600 manual on a cd it is a copy but if anyone can make use of it there welcome to it f.o.c

Maxton Shock for Yamaha FZ1 Fazer - in very very good condition.  Low mileage - just a few thousand miles on it

£250 inc P&P - a bargain

Was fitted to my FZ1-S (2010) - but should fit any of the Gen 2 FZ1 Fazers ( 2006-2014) - however, you should probably double-check on http://maxtonsuspension.co.uk if you're buying for anything other than a 2010 FZ1-S

Currently set up for a 90kg rider in all the kit - as you can see from the pix, there's plenty of adjustment up and down from that.

This is a serious upgrade on the cheapo shock that's fitted as standard and transforms the ride

You're welcome to collect the shock from Portsmouth to save on the P&P, although if collecting it's Cash on Collection

Attached Files

  maxton1.png (Size: 619.32 KB / Downloads: 79)
  maxton2.png (Size: 601.31 KB / Downloads: 75)

Hi folks, does anyone have one of these caps available for me to buy off them , I have 1 missing ... cheers Arnie

I have this set of colbolt drill bits http://www.toolstation.com/shop/p94153?table=no but most of them are now blunt.
Can someone recommend a sharpening gizmo to re grind them, I do have a bench grinder and stone but I can never seem to get the angle right.