Free but you have to pick it up, will definitely not post, near Durham City. Excellent condition and about £60 new.
Pm me if you are interested.
Cheers
Carl

Attached Files

  image.jpg (Size: 121.36 KB / Downloads: 223)

The project bike I bought has a duff fuel gauge.  Thought I'd take a look whilst waiting for other bits to arrive. The green connector on the tank appears open circuit, guessing this should give a resistance?  Still waiting for workshop manual to arrive, so could someone let me know the resistance range so I can check the rest of the wiring/ gauge assembly?


Thanks

Hi,
Don't know if this has been mentioned before but just a heads up, I thought I would have a nice easy tyre / wheel change today.
The chain adjuster bolt was seized solid ( I mean solid ) plus gas , heat , plus gas , heat etc etc ..freed off . but if it had broken it would have been a drama.
I pride myself in coppersliping everything, my bike is low mileage. garaged, .
If you do a wheel change or chain/sprocket take the bolt all the way out and lube it all. saves later upset.
cheers Flooky

Hello again!


well, my little donkey Fazer was a victim of the current Edinburgh bike thefts last week.


thankfully, I managed to get it found and returned to me.


the little scrotes snipped all the ignition wires in order to jump start the bike... and rode it away.


when it was recovered, it could still be jump started and ridden..


I've now had all the ignition wires re-connected (matching the colour tracers in the wires) and a big 30 amp fuse replaced.


however, when you hit the starter button, the bike doesn't start, it doesn't even crank.


you can hear the fuel pump working, the battery is fine...


all that happens is the fuel light and oil light come on.... they are not lit up along with the N light when you turn the bike on.


so I'm a bit lost...... has anyone got any ideas?!?!?!

Have been having a good sort out & am offering the following items to anyone interested. Before anyone says "Thats not much cheaper than dealer/ebay etc" please note the price stated includes all postage/packing costs.

1 Hiflo HF147 Oil Filter      £6
1 Drain plug crush washer FREE WITH ABOVE  OR £1 bought separately
1 Hiflo HFA 4606 Air Filter £12
4 NGK CR8E spark plugs  £20
1 Yamaha Front Sprocket Upgrade Kit part no 90891-10124 (contains 12mm nut & lockwasher)  £5
1 Yamaha "Collar" part no 90387-126T1 (illus no 16 in online parts drawings-REAR SUSPENSION)  £10
2 "Marksman" supplied high quality caged needle roller bearings for above (half the price of OEM part no 93317-41761-illus no 15 in online parts list) £15 the pair. nb Price for Collar & Bearings together is £20.
* the above 2 items namely collar & bearings fit EITHER under swing arm OR in LONGER of the 3 sections in the pivot assembly at base of rear shock.
1 complete set "Marksman" supplied CODEX  brand high quality tapered roller bearing headset complete with seals, unopened £20
1 Fairing Infill panel Yamaha "Rivet" part no 90269-07076 £1
4 Chrome finish Yamaha plastic caps for handlebar clamp bolts part no 90338-08163  £4
1 Rear Brake caliper centre o ring (small) that seals the two halves of caliper when split for overhaul etc. £1-50
1 Pilot Screw & washers with FREE 8 small o rings included for carb overhaul Yamaha part no 5DM-14105-00 -Suits carb type fitted to 2000-2001 model year £20 ( Yamaha price £30-71)


Please PM for payment details or any further info.
Many Thanks, Dave

Honda Racing GB have decided to not compete in the Armoy & UGP road races.
I think it is more down to Guy Martin refusing to ride the bike as it is uncompetitive and is a widow maker.
Let's face it the new SP2 Fire Blade has spat John McGuinness of during practice at the NW200 this year and John is lucky to be still with us. Guy Martin has binned it twice at least and has been openly ctitical about the bike.

Well after 14 years of owning a great bike thats never let me down I've decided to sell the Fazer. Silver , bought new. Used but not abused its in good condition . Some wear and tear marks - due to tail pack and a bit of engine paint flaking. Rear Hugger, fender extender, radiator protector and scottoiler from new. Raised bars. Tony Archer seat. Delkevik Downpipes some two years ago. Michelin Pilots.Never dropped. MOT until May 2018 and ready to go around the world.  Used as second bike last few years so small miles. Genuine bike and a bargain for someone.  Haven't managed to upload image but will gladly forward by e mail. 

1 - Left hand rear panel (Red with the black/silver stripes) or full silver seat unit
2 - Full headlight assembly (Mine has a dodgy single headlight conversion and I want the stock one putting back on)
3 - Possibly some decent condition OEM downpipes or any stainless steel ones with OEM dimensions
4 - Set of chain adjusters (mine were rusted to hell so snapped when adjusting the chain)
5 - Alternator/Stator cover


Thanks in advance

Hello All.


Finally managed to figure out how to add images.( A picture saves a thousand words.)


So here is a pair of Black Frame Infills as advertised for sale in my previous post. Please note it is only the Black Alloy insert over the swingarm pivot not the whole assembly.
£25 posted.


NOW SOLD.


Cheers.

Attached Files

Thumbnail(s)
   

Just trying to figure out, how to add images.

Attached Files

Thumbnail(s)