Does anyone know how to split the headlight open without damaging it?


I bought one off eBay cheaply to be fair (was also advertised on here) with a stated broken fairing mount lug but the seller must not have checked under the rubber bulb seals as the reflector/shield on the near side light is broken and flapping about only held in place with some wire. I bought it as the front lense on mine is heat damaged from having electrical tape stuck to it to pass an MOT as it was wired up wrong, no longer thanks to the headlight mod post on here! So I want to swap the good lense from the eBay unit with the good back housing of mine but as well as the tap/clips holding the two together it appears to be glued or have a sealant which I guess makes sense... got me a bit stuck at the mo

Interesting read on MCN last Wednesday

Wasp Motorcycles built retro using the 2000 Fzs600 engine

https://www.pressreader.com/uk/motorcycl...4877016873

Which size push rivets are used to hold in the panel that goes around the seat, both mine are missing ?

Hi All,


I've got a radiator cover that I thought would fit my FZS600, but it doesn't.  I'm trying to work out what Fazer it's for, apparently it doesn't fit the Thou or the 8 so I'm hoping it's for the FZ6.


Could someone measure their radiator and in particular the distance between the 2 screws on the guard on either side?


Cheers

It’s a 2003 fazer 600 I stripped it for painting and I’m now in the process of putting it back together, but one of the exhaust header studs has stripped and can’t get a stud extractor on it because it’s too tight a gap.... but the main issue is


When I turn the ignition on there’s a clicking coming from the fuel pump area.... it stops after a few seconds if I then fire the bike up it carries on clicking the whole time the bike is running, none of this was happening before I stripped it ? any help would be massively appreciated

I have a "Wanted" post in For Sale/Wanted but in the meantime - has anyone got any personal experience / recommendations regarding hard luggage
for a Gen.1?
Thanks.

Not fussed which brand but must include rack.
I am in S.Devon but happy to collect or arrange courier.
Thanks.

As spring slowly approaches I’m looking to swap my FZS600 headlights (with burnt-out reflectors) with one from the FZS400. It came from eBay with its wiring that connected to its original harness. The question is, will I be able  to ‘plug’ them straight in, or would I be best doing the headlight mod to get both dipped beams on together? Any advice would be much appreciated.  :rolleyes

Selling good used Puig dark smoke screen as no longer have bike. summer use only may fit fz1 as well. worked well for me. 5ft 9 " rider £50. postage £6 uk uninsured .. £11 insured.

Attached Files

Thumbnail(s)
   

Am I right in thinking (poor memory, and its too cold to go out and check) the top yoke nut is M22 x1mm


Des