Hello guys.
I want to make my own simple maintenance for my FZS 600 1998-1999.
I downloaded the manual and it explains how to remove the fuel tank. I never removed a fuel tank and would feel more confortable if I see it first. Is there any video available that shows how to do it? Or if not, is it quite simple?
Thanks
Miguel

Hi,
Can anyone let me know the paint specification for the following:-


Gold ....FZS Fazer 600 1999?
Regards,
John

Thanks Robbo for the givi  bars , couldn't get hold of any supports brackets but ended up welding some supports on and bolting to the helmet holder hook holes ( after strengthening) I show what I did at the end of my video https://www.youtube.com/watch?v=aSIlzkB7EkI

As it says, if a camera van is facing towards you, can they get the camera laser speed detector to work through the windscreen or does it have to have a clear path?

Because they always have that little flap open, which they point the camera through at the back.

Hi,
Looking for a front fairing for an FZS Fazer 600 (1999)
in gold if possible but anything will do.
Regards,
John

A reiteration of the rules.

1. All challenges must be of YOUR bike and a landmark, or something obscure or creative, something most people can ride to in their area.

2. Picture has to be taken after challenge is made.

3. Challenge is good for a week; if it is not met after that time, the previous picture poster picks a new challenge.

4. Nothing illegal to be challenged.

5. Keep comments to a minimum; if you comment, post the current challenge in bold type after your comment.

6. No repeat challenges.

7. No other bikes can be used, eg, your bike next to a Ducati. Some exceptions will be allowed, eg, your bike next to a bike cop.

8. Only 1 person can win each challenge; any other entrants will not be counted, due to throwing the whole game off track and adding challenges that don't stand.

9. If any dispute about a challenge occurs, 3 oks from others settles the challenge.

Remember, this thread is supposed to get people to want to go ride straight away and beat others to the challenge - be creative, but be sensible about it.

Have fun Foccers!

Bike work bench for sale built from plans. Constructed from 50mm box section & 50mm angle iron uses 4x4 trolley jack to raise and lower which is with it.  has a 19mm plywood work/platform on. Platform size  2400mm x 800mm, 4 platform working heights 190mm, 520mm, 660mm 760mm. My son did the welding which he does at work as part of his job. It's primed but needs a coat of paint. Built about 6 years ago to big for my garage at house just moved to. £75. It's pretty heavy so you will need trailer or van. Rebuilt XJR1300 and FJ1200 on it just to give you some idea of size.  Sorry no photos I can't work out how to post any (useless on computers) 


Now gone to a good home
 

2007 FZ1s ABS,  15141 miles,  £2700.
I am in Leeds, West Yorkshire, if you are interested in buying or want more info or pictures please send me a pm.



Mot February 2019, in good overall condtion, I have owned it since May 2014, two keys plus the red key.
Oil and filter changed at 14000 miles.
PR3s fitted at 14000 miles.
Juicebox Pro fitted, ( Two Brothers version of a Power Commander 3 basically but with the ability to have up to 8 different fueling maps loaded ),  with custom fuel map to suit bike done by RaceHQ in Leeds.
Akrapovic end can plus original.
R & G bar ends plus originals.
Heated grips.
Aftermarket brake and clutch levers plus originals.
Aftermarket screen plus original.
Givi rack.
Clear indicator lenses plus original.
Led rear light plus original.
Bellypan.
Fender extender.
Carbon fibre chain guard plus original.


Not so good bits:-
Slight scuff on left hand mirror and crash bobbin due to dropping it in garage when my foot slipped.
Little bit of paint rubbed off swing arm due to boot rubbing.
Small stone chip on left hand grab handle.

Attached Files

Thumbnail(s)
               

I've got a spare standard screen off my boxeye.  £25 posted

Attached Files

Thumbnail(s)
       

Hello all,


Would anyone be interested in my old Boxeye fairing?  It's solid apart from the repair that I sadly opened up again last year.  I've gaffa taped it on the inside and put clear waterproof tape out the outside.  If anyone's a bit handy with the old plastic welding it could make a good fairing again.  Postage is £12 according to Royal Mail so how about £40 posted?

Attached Files

Thumbnail(s)