There has to be one (or two) in the font of knowledge that is FOC-U

How much should I be paying for 56 m2? No steps, manhole covers etc to negotiate, no retaining wall needed, so a simple job.

Been quoted 5400, using Grade 1 MOT instead of the - forget its name - yellow hardcore alternative? Thats from a company that are known to be pricey, but do a good job (in theory anyway, neighbours drive is dropping a bit where the car wheels run (but not, bizarrely, where the car is normally parked!). Its Beamish cobbles too, not yer standard blocks.

Is it close to a decent price? Got another guy coming tomorrow, much smaller outfit, see what he says...

is it normal to see a small pool of water/greasy stuff on the floor  from where the breather tubes exit beside the brake switch,  i noticed the othe day that the tubes were not in the right place and the one that comes from the left hand side tank when sat on the bike was cut where it goes underneath the side of the coolant tank attached it back with plastic ties and the plastic clear tube stopper that was there and since then ive had the small pool is this norm??
i noticed when i took the clear plactic tube stopper out there was a lot of water in the pipe ??

Hi all, i have a Meta 357T on my FZS600 only problem is it only has 1 fob. does anyone know anything about getting an extra fob added on? i have read it needs a code put in but i have no idea where to get this and input it even if i had it.

any help would be greatly appreciated.
thanks in advance.

Hi  ..what oil do i put in for fz1 n ..always use castrol p1 on my busafz1 and is it semi or full ..T and b king  can i use this in

Hi all just tried to start the bike after its winter lay up.  Tried to start it and all I got was the starter relay chattering and the Rev Counter going from zero to 9k and back again, have seen this before but only to 7k and this beening the exup valve. 

Any idea what the 9k means??????????

thanks for reading..

Hi Guys, I want to change the panel/bodywork bolts but i'm not sure on their size! i think that they might be M5,I want to change to Stainless like these
http://www.ebay.co.uk/itm/FLANGED-Stainl...2324wt_905


Is 16mm length going to be long enough or should i get longer & cut to size?


Cheers Ray

Hi guys , yet again I find myself needing all of your advice.
This morning when I went to start my fazer 1000 there was a back fire and vapour came out from under the seat, quickly took the seat off and lifted the tank and could not see anything out of the ordinary. I have recently given the bike a service and took it on 30 miles ride ( to squires and back ) for a test ride with no problems. Can anybody tell me why this has happended? will it be ok to keep riding it or is there something i need to look for.

Again thanks for your help and advice I'm suppose to be going to the lakes today and don't know what to do, I have just started the bike again with no issues
Thank you
Crew

t

Any thoughts on how to remove a seized bar end? The hex screw has seized and now has been rounded off, i was thinking of just hacksawing it off just at the space between it and the handle bars. But will it all come out or will bits of it still be up inside the handle bars. Or is drilling the screw out the easier option.

Yamaha Fazer FZ1 1000cc
2010
tax 31/05/10
6600 miles
£4695
located rotherham souh yorkshire
Graham 07760 97 97 92
awesome bike lovely to ride
the bike was recorded as accident damaged by the insurance of the previous owner cat d, this is the lightest category
i did buy it with intention of repairing it but was too busy riding it, now I'm selling it though it would be better to leave the damage for you to see yourself,
the front fairing was marked and chipped as in the pic its now been repaired and primed ready for painting, should be less than £100 to get it painted
there's a small mark on the left crash bung and its bolt is slightly bent, these are for sale on ebay, that's about the main damage just a few other little marks here and there , there's no other fairing or tank damage
doesn't actually need anything doing to enjoy riding it

http://i1216.photobucket.com/albums/dd37...er/011.jpg
http://i1216.photobucket.com/albums/dd37...er/010.jpg
http://i1216.photobucket.com/albums/dd37...repair.jpg
http://i1216.photobucket.com/albums/dd37...er/008.jpg
http://i1216.photobucket.com/albums/dd37...er/007.jpg
http://i1216.photobucket.com/albums/dd37...er/006.jpg
http://i1216.photobucket.com/albums/dd37...er/005.jpg
http://i1216.photobucket.com/albums/dd37...er/004.jpg
http://i1216.photobucket.com/albums/dd37...er/003.jpg
http://i1216.photobucket.com/albums/dd37...er/002.jpg
http://i1216.photobucket.com/albums/dd37...er/001.jpg

any web site guru's on here ? i need a revamp on my menu page and need some idea;s i can only work in frontpage 2003 as this is all i know

i want summat flashy ?