Can anyone recommend best place for a set of down pipes in steel or stainless steel for FZS600 2002. Existing pipes blowing in two places where 4 go into 1. Looks like they have been repaired before with patch welded near to junction into single pipe. Any advice would be welcome. Thanks rocketman59....

I've been trying to post a pic in "My other ride" thread 5 attempts each time saying i don't have the permission  & a 404 error code! anyone else having trouble??


Ray

Selling my renntec on 'the bay.

Cheap cheap!

http://www.ebay.co.uk/itm/280902867846?s...1555.l2649

Been setting up the suspension following this guide, http://www.gostar-racing.com/information...set-up.htm

All is well and this mornings "test session" was one of the best rides I've had on the bike in quite some time

My question, is how far will the front forks travel? Do they completely go to the bottom of the chrome tube or will they stop before this?
I ask because the man say's to get the cable tie to stop around 10mm from the bottom of the travel. I've got it about 15mm but the preload is virtually right out and me being 14 stone in me undies I'd have thought I would need a fair bit of preload for my weight and I'm wondering if I am in fact bottoming out.

My question is, both front and rear discs are grooved, the front is slightly but the rear is quite bad. When i bought the bike it passed MOT with advisory with a grooved rear.

hi guys im looking for a mark 1 fazer 600 in good standard (ish) condition with mot etc doesnt need to be perfect but dont want a pile of rubbish! idealy in yorkshire area if possible,cash waiting for the right bike,cheers mark

Hi lads and ladies. Just a short intro. I'm Tom, 22, from Cardiff and I've recently acquired a 2003 Fazer 600 that's been standing for the last 6 years.
Hope to use this forum for some friendly advice and get a bit of knowledge on the girl.    Probably should mention I'm yet to do my full licence, though getting the bike has given me more of an incentive! Need to get it done this summer due to the laws changing next year. Oh to be young!  :'(

  I need a yamaha fazer Renntec rack

email me at:gscoxon@hotmail.com

I have an XJ900 Diversion that has been sat unused for a month, i have given the battery a charge using an Oxford Oximiser 600,i gave it a 12 hr charge which showed to be a full charge according to the chargers instruction?, After connecting it back up & pressing the starter all i got was a clicking,then a buzzing from the solenoid! & all the lights on the dash dimmed quite badly as if the battery is knackered  :eek ??? i have now got the battery on charge again but this time its gonna be a 24 hr charge.


Any suggestion to why it wouldn't fire up after after a 12hr charge?, i am going to sell it but i would like it to be running before i do! 


Cheers  Ray


PS i don't have a multi meter to check the voltage  :rolleyes

Was looking to take advantage of the 0% finance yamaha are offering  :b
WGP50 FZ8 caught my eye and i could easilly afford it... then checked the insurance  :rollin TPFT £3960 bike value £7500 i'm 22 with 2 years NCB



Sickening!