Just saw the news that Simon Andrews has died from his injuries.
Very sad news, he was a great guy, my condolences to his family and friends RIP

Hi Guys,

Decided to change springs and oil to either K tech or Hyperpro. Is there much difference between them? They are priced similarly.

For K tech which one should I go - there are those rated 8.0, 8.5, 9.0, 9.5 and 10. I presume it doesn't really matter since I would be able to adjust them anyways??

I am 84 kg

Thanks
Paul

I need the hydraulic bump stop off the bottom of the fork cartridge for a customer who has had a mishap....


Anyone got an old bent fork around they can rip one out of or sell me the bent fork?


Whale

I need the hydraulic bump stop off the bottom of the fork cartridge for a customer who has had a mishap....


Anyone got an old bent fork around they can rip one out of or sell me the bent fork?


Whale

I've never seen anything like this before...every 20 seconds my jaw got lower and lower.  Truly beautiful!


http://www.wimp.com/industrialcuts/

Not mine but belongs to an acquaintance.

Fazer fzs 600, 2000 V reg,

Will come with 12 month M.O.T. 14000 gen miles,

Got all M.O.T's since born,

New battery,
New chain and sprockets,

Runs fine lot of extras,

£950 o v n o

Reason for sale just upgraded to a Thou (Gen 1).

PM me with a contact number if interested and I'll put you in touch.
Location Buxton, Derbyshire

As per title, my repaired starter cover. It's been plugged with araldite and painted. Gasket is damaged where I took it off but have some gasket paper I will include for you to make one up. No bearing in so you will require a new one/remove your old one.

it's done over 3000 miles with the araldite in place with no issues.

On offer for £25 & p&p.

just a warning to any who go down the coast, took the family down to southend yesterday, in the car, loads of nice bikes, but there were some parked on the promenade/ sea front, all got tickets taped to there throttle.
also they have average cameras on the front 20mph.

                      tex

Has anyone had this problem with their fazer?

Typically, I use the bike for commuting 70 miles a day, and it sits on the motorway around 65-70mph.

Yesterday I took it out with some friends for a spirited ride…

However, when exceeding 70mph (on a private road) the bike starts to shake, a lot. At 80mph and above it just feels like its gonna chuck itself over. This is in a straight line. During cornering it felt worse, and my mate commented it looked like it was buckarooing…

Tyre is only 3k old, and was balanced when put on
Tyre pressures are fine
Head bearings seems fine from the side to side trick, not front to back play either.
Bars are raask jotas (with a much wider spacing which in theory should hold the bike more stable from rider input) , but it also did this on the stock bars.
Wheel axle, is tight, all yoke bolts tight
Brakes aren’t interfering, and the discs aren’t warped, it brakes smoothly from that speed also.
Tyre wont have gone out of round either as its left on centre stand at night and covers at least 250 miles a week., it also wont have slipped on the rim, as it’s the front, or maybe the back on has?!



Wtf? I don’t remember it doing this before, but then again, ive always really only used it for commuting as I have other bikes to be silly on.

Wheel bearings?
Suspension fooked? Ive got a 98 mode, so cant adjust anything.

Ok so the first two aren't really that close just bad driving but the car at the end was complete and utter cock.

https://www.youtube.com/watch?v=AbEgP9t383o