As per above need the nylon insert with two lugs on please bit of a long shot but worth a try thanks-

Anyone going??

Just brought a 2007 FZ1N in yellow.
So pleased with every part of this bike.
Located in Essex

Attached Files

  Screenshot_20170714-132305.png (Size: 557.18 KB / Downloads: 22)

[color=rgb(29, 33, 41)]FZS fazer 600 parts for sale from both models:[/color]
[color=rgb(29, 33, 41)]Foxeye parts available please see list lots already sold basically what's left is in this advert
Tank overall GC few scratches in lacquer,a very tiny (barely noticeable) dent has no rust inside £80
Side panel tail unit yellow vgc SOLD
Front Mudguard black metallic paint £30
Wiring loom £35
Cdi unit £20
Starter solanoid £10
L&R switches £15 each
Rear shock SOLD
Rear swing arm £20
Head cams,shims & rocker cover etc in vgc £80
Barrels & pistons SOLD
Sprocket carrier
Cush rubbers
Sprocket cover
Generator cover SOLD
Left frame panel
Left airbox panel
Clock set
Starter motor
Rear light
Rear light bracket
Clutch cable
Cam chain tensioner
Fuel tap
Fuel gauge
Engine mount & bolts
Thermostat & all pipes
Side stand
Side stand switch
Rear brake torsion bar
Shock linkage
Front & rear spindle
Bottom yoak[/color]
FZS Boxeye parts
Frame,s/arm,sidestand + switch etc see pics inc V5 old mot's etc £60 can post at cost via palet
FZS 2000 bottom end complete SOLD
The front fairing has SOLD
Fairing h/light bracket SOLD
Fairing alloy brackets £10
Front mudguard SOLD
Rear tail panels £30
Tank now SOLD
Lockset top yoak inc switch,petrol cap & seatlock 2 keys SOLD
Wiring loom in vgc SOLD
Left & right switches £15 each
Generator inc cover £50
Reg/rectifier £15
Throttle £13
Rear light £5
Rear frame mudguard not cut or damaged £15
Right hand riders footpeg inc brake lever
Spindles front & rear plus spacers
Cush rubbers
Sprocket cover
Starter motor
Rear light
Rear light bracket
Clutch cable
Cam chain tensioner
Fuel tap
Fuel gauge
Engine mount & bolts
Thermostat & all pipes
Radiator inc fan
Side stand
Side stand switch
Right riders footpeg inc brake lever
Rear brake torsion bar
Shock linkage
Front & rear spindle
Bottom yoak
Sprocket carrier
Wheels front & rear £10 each postage to uk mainland is £10 each

Attached Files

Thumbnail(s)
           

  image.jpeg (Size: 58.39 KB / Downloads: 99)

coming home from work this morning on my thou on a two lane stretch of road, me in inside lane stopped at a set of lights, a guy on an xjr1300 pulls alongside.
Yeah he wants to go.
Lights change, boom we're gone.
He was toast.
I'm not proud but boy did it feel good.

So my bike started to pull badly on low rpm. I had to drive 400 kilometres because I was long away from home. Firstly it sound like its running on 3 but when it takes 6k rpm it sounds normal again. But now i think its running on 3 cylinders all time and cant go above 120 km/h. I have driven only 2k kilometres on my sparkplugs but i tested my old plugs and it works the same way. 1 cylinder exhaust pipe doesnt heat as much as others. When I emptied carburetors there was much less gasoline on 1 carburetor than others. So can a bad carb balance make that one cylinder isn't running or should I take carbs out and try to clean them? It also backfires on exhaust pipe if accelerate full throttle and then let it go.


So what should i try first? TPS, sync carbutetors or take carbs out and clean.

Hi chaps recently became proud owner of a 2006 fz6 so far have put set of pirelli corsa diablos/renthal bars/puig double bubble black screen jus lovin it.My question is havin looked on youtube and seen how to drill out rear collector box does this not affect mapping /breathing for bike and has anyone tried it oh and does it improve performance cheers Stu 8) 

ok folks heres a damn annoying one.
i have a 02 series 2 fzs 600. full history, really good nick with 46 k on it.  well it started cutting out after a 5 min ride. loses spark. after a few mins it will start again and ride perfectly for a few miles then cuts out again. it will go all day like this, a few miles then leave for 5 mins, etc etc. it cranks perfectly. 
i thought it may have been heat related so left it at 4000 rpm for 20 mins on my drive, fan cut in and out as it should but bike didnt cut out. thought it may be bad connections so checked every connector plug, all perfectly clean and healthy.


help. im going nuts

Hello.


I have for sale, a Beowulf Stainless Steel Radiator Guard/Grill. Fits the Fazer FZS 1000 Gen 1.


It is in very good condition.


£35 posted. NOW SOLD.


Cheers. 

Attached Files

Thumbnail(s)
           

Are there any aftermarket ones out there? I've found the £900 akraprovic titanium ones and i can dream but with a more realistic view I'm just after some more stainless ones. The standard ones are starting to pit and corrode up near the engine so rather than replace with originals I'm just trying to find an aftermarket solution. Anyone know of anything?