thought I would do an oil and filter change to save money , can I get the filter off ?  no way tried loads of tools on it , so ff it has gone to the guy who put the last one on !!  grrrrrr  so much for saving money

Hi everyone..i have just bought a 06 fz1 n after parting with my busa ..55 Years young and wanted something abit lighter this seems to fit the job..not been on it much only had it monday this week ..9000 ..06  £4000 ...i'm from nuneaton hello all

Attached Files

Thumbnail(s)
   

:'( Help has anybody got a complete set of front forks for my 2002 fazer 1000 due to the usual i didn,t see you mate cash waiting thanks.

The round bracket that goes around my stock exhaust is a bit loose. It maybe the spot welds have come loose in parts. I have notice some after market exhausts have a "rubber" strip underneath the round bracket.

Can these be purchased separately and if not could you recommend something else that would work and be able to deal with the heat ?

I can only find this but it seems like I would have to break my clamp off

http://www.ebay.co.uk/itm/MOTORCYCLE-EXH..._734wt_689

Do the wheels off a thundercat fit fazers? And the rear caliper, could it fit?mand are the any better?

Thanks

Just rejoined from the old site so I thought I'd better say hi. I've got a gen 1 fazer 1000 and based in Leeds

I've noticed that when I start my FZS1000 up from cold the cooling fan runs whilst the bike is stood idling.As soon as 1st gear is selected the cooling fan stops. I've not done any fault finding yet but wondered if this is a common fault on these bikes or if anyone has any advice on how to cure it.
Also when stood at junctions with the bike in gear it feels like it's trying to creep forward, I suspect that this is clutch drag probably due to the oil needing changing but as it's done 36k it could be the clutch plates I suppose. It does seem to be quite hard to change down from 5th to 4th to 3rd gears as well. The chain is in good condition and correctly tensioned so I don't think it's this but I wonder if it could be the cush drive?
Finally, does anyone know where I can get the fairing graphics for my 2003 yellow FZ1000S?
Thanks in anticipation for any help.
Steve.

Hi all, I've just joined the forum having recently purchased a 2003 Fazer 1000. I've previously had two 2004 Fazer FZ6's also.Enjoying the new bike and the weather!! Steve.

for fazer 600 99'

cheers

Hi Guys need your help once again , just servicing my fazer 1000 thought I would start with the coolant change as seems straight forward enough, removed coolant drain bolt drained coolant no problem. When it comes to the reservoir the Haynes manual states that's I either detach the over flow hose from the radiator filler neck and draw it out from the bike and placing it lower than the reservoir or remove the reservoir itself which looks time consuming. Anybody changed their coolant recently and come up with a different way ???
many thanks for your help
Crewpack