http://evalbum.com/3694
http://evalbum.com/3977


It's amazing what you find out there on that thar interpipe thingy.

I found these:

http://www.louis.de/_20dc628a96721c1d986...r=10003646

Regardless of the price, are these tools any good?Proxxon is a UK company (is it?), so guess some of the FOCcers might have given it a try.


Looking for decent set of ratchet tools with sockets that won't cost an arm and a leg, but are good enough not to break themselves or strip bolts.

just enquiring if anyone has one of these installed, Would like to remove that pesky limit on the first gear.[size=78%] [/size][/size]and also see if it removes the "run like crap mode" when removing the speedo drive as i have done. (although it is barley noticeable)Problem is.. i have removed the speedo drive and most of the pictures i have seen on the net show the deice going in between the drive and the loom, but others go between the ecu and the loom, which one is used for the fazer?Thanks,[size=78%]
[/size]Tom[size=78%]

Do you and how long did it take you to filter with confidence and what are your do's & don'ts

I like to get up front and put the bike and myself in front of any other vehicle to show my intention as I have been in a position when cage drivers will try and race me with little success but try and force me over. They do not like a bike progressing.

Daz

rain at last

I've got a Shoei full face helmet but only the cheek pads are removable, not the bit that goes over top of my head. To complicate things I've got Autocom headset installed which is really fiddly to remove & put back. So basically  am looking for just a convenient method to clean the inside until I go the whole hog which is to use a shower head and some fabric cleaner. I'm sure I'll be corrected if this is a bad idea .
Advice & other peoples experiences all appreciated.
Cheers

A new royal sprog.  Yipee kayai mf.

How long until life resumes ?

Just a quickie as I cant be arsed to go out to the garage to check.... Anyone know off the top of their head how much road tax is on a, Fazer 600??

Hi there, I've got a problem with the clutch on my 2003 FZS600.  I noticed the clutch freeplay was a bit more than it should have been and tried tightening the cable, but the handlebar adjuster was already wound most of the way out.  So I thought I'd have a go at the other end, couldn't get a spanner with enough offset for the locknut so I used a socket (took some welly before it came loose), but the centre screw still wouldn't move and I didn't want to chew the end up, so I ordered a pattern clutch cable to take up the slack.  Just fitted that and it is just the same as it was before.  Is there anything else past the clutch cable which could have worn / stretched / broken to make this effect?  She's got 32000 on her and is mechanically all original.

I'm selling my trailer  its a professionally built Hazelwood  model  ,weight limit 500kgs  but limited to 60 section rear tyre( 600 Fazer) it has 8 inch standard trailer wheels and rubber suspension
will dismantle to fit into a hatchback car, now listed + picture on local freeads site Viva St  located nr Redruth in Cornwall
asking £100 for it

Attached Files

  Bike trailer.jpg (Size: 157.25 KB / Downloads: 44)