FZ1N 2006 Speedometer onto a FZS1000 2001

[2BALD4YOU]

Question:
I’m trying to install a 2006 Yamaha FZ1N digital speedometer on my 2001 Yamaha FZS1000 Fazer. Both models use the same 16-pin (2x8) connector, but the pin configurations and the wire colors seem to differ.

I have scoured the web trying to find something to help me and have spent many hours trying to figure out the wiring diagrams in the service manuals . However, as I’m new to this stuff, it turned out to be a bit more difficult than I thought. The only diagram I’ve found for the pin layout is for the FZS1000, which I’ve attached below. As much as I understand from the wiring diagrams in the service manual, I believe this pin layout seems to be correct.

 Let me know if this link works?? I have never posted a post on a forum before.
  FZS1000 maping.png (Size: 104.62 KB / Downloads: 32)

I can’t seem to figure out the FZ1 2006 pin layout, though. I was really hoping it would be plug-and-play, but here we are!
Could someone provide a detailed pinout for the FZ1N speedometer, including wire colors and functions? If anyone has experience with this swap, how do I rewire the FZS1000 harness to work with the FZ1N speedometer? Are there any signal compatibility issues I should look out for (e.g., tachometer or speed sensor)?

Any help would be greatly appreciated!

[unfazed]

Not possible, as the FZ1 Gen 1 instrument cluster is ECU controlled, only option is the 2000/2001 R1 clocks, but you lose the fuel guage as it only has a reserve light. 19988/1999 wont work ans it does not have Coolant Fan Motor Relay control see the downloads for the pin outs of 600, 1000 and both carburettor models of the R1.
I will upload a file I created when investigatng fitting a digital type instrument cluster to the 1000 with the instrument cluster pin outs of both versions of the carburettor R1 models, the Fzs1000 and the 3 versions of Fzs 600

[2BALD4YOU]

Here’s a polished version of your text:

---

Hey

Thanks so much for your reply. From what I understand, it seems like the FZ1N speedometer won’t work on my bike. What other aftermarket speedometers could I use, or what should I look for in a compatible unit? My goal is to convert the bike into a naked version while upgrading the speedometer, as the stock one feels quite clunky. 

Also, you mentioned a file you created with the pinouts—could you please share it here? I don’t seem to see it attached. 

Thanks in advance for your help! 

Not possible, as the FZ1 Gen 1 instrument cluster is ECU controlled, only option is the 2000/2001 R1 clocks, but you lose the fuel guage as it only has a reserve light. 19988/1999 wont work ans it does not have Coolant Fan Motor Relay control see the downloads for the pin outs of 600, 1000 and both carburettor models of the R1.
I will upload a file I created when investigatng  fitting a digital type instrument cluster to the 1000 with the instrument cluster pin outs of both versions of the carburettor R1 models, the Fzs1000 and the 3 versions of Fzs 600

[unfazed]

Managed to upload it this evening and it is waiting for admin approval
Correct FZ1 one won.t work. The easiest option as I said is the 2000/2001 R1 5JJ model, but you will need to move around a few pins in the cable connector on the harness
I am not sure what other clock will fit as the control of the Fan is the main issue

[BBROWN1664]

Managed to upload it this evening and it is waiting for admin approval

Apologies, i didn't get a notification but its all approved now.

[unfazed]

Managed to upload it this evening and it is waiting for admin approval

Apologies, i didn't get a notification but its all approved now.

No bother

[2BALD4YOU]

I’m fairly new to forums, so I’m still figuring things out. Could you clarify where I can find the attached file? Should it already be visible to me?
Additionally, could you guide me on which pins I would need to change once i get the R1 to get the speedometer?

Thanks again for taking the time to reply! ?

[unfazed]

Click on the bike at the top and you will see in in downloads