Rocker cover gasket

[Ratters]

Hello Foccers


Im replacing the rocker cover after valve check they are all good after 50000 miles but i cant getvthe gasket to stay in the groove when i go to put it back on. Any tricks to get it to stay in the groove mates?


Much obliged.


Matt.

[agricola]

FZ6 or FZS600??? I did my FZ6 S2 late last year, the tiniest blob of superglue in a few places should do it, although I never had a problem with mine. If its the FZ6, double check to make sure if you need to cut out the extra bits from the gasket or not

[Grahamm]

Are you reusing the old gasket?

I thought it should be replaced...

[unfazed]

Ordinary Grease in the groove and on the gasket. Helps sealing and any excess can be rubbed off on the outside or dissolves in the if oil on the inside.

[agricola]

Are you reusing the old gasket?

I thought it should be replaced...

Fair point. I assumed he was using a new one

[red98]

Iam sure it's a re-useable rubber one....like a O ring but bigger and  different shape  :lol

[Ratters]

Cheers, grease is the one, did the trick nicely.

[Grahamm]

Fair point. I assumed he was using a new one

In the original post "it" could be read either as being the gasket being put back on or the rocker cover being put back on...