R1 Clocks Switch - Electrical help

[Jbizzle]

Can anyone with a bit of electrical know how give me a hand with this?


I'm trying to switch the clocks on my 2000 plate FZS600 with a R1 (5JJ) clocks.


I have the R1 front end on the bike, having the corresponding speed sensor / clocks seemed like a good idea at the time :rollin


I'm struggling with working out what's what, on the R1 terminal from the wiring diagram.


Perhaps I am going about it the wrong way?

[Disorderlypunk]

if you ever get it sorted and working right please let us know cause it seems like a nice little upgrade

[kebab19]

Is it the same as the early FZ1/FZS1000 sensor running from the front sprocket?  If so, why not just run it to the original clocks as forum member Muddybuddy did?

http://foc-u.co.uk/index.php/topic,14254...#msg162228

[Jbizzle]

Hi Kebab.


I could do but i kind of want the challenge of getting these to work.


I will document it all in case it does come off then anyone else who wants to give it a bash has an initial leg up.


Does anyone know if i can actually narrow down each wire in the loom using the wiring diagram?


Cheers,


James

[ben]

Are you trying to connect the R1 main harness to the Fazer? Or are you trying to connect the Fazer wiring to the R1 instrment panel?

[Jbizzle]

Hi ben,


I am trying to connect the R1 instrument panel, to the Fazer main harness.


The bike is a FZS600 2000 (5DM). With the normal loom etc.


But the Clocks/ instrument panel are off the R1 (5JJ).


So I will be using the connector for the R1 instrument panel, from an R1 front loom that I purchased. Then cutting off the wires at the  at the loom end, then matching up each of the wires function,  with the Fazer wires by colour.

[Disorderlypunk]

have a look at
http://www.robcollingridge.com/kitcar/de...locks.html
might be a bit of help to figure some of it out

[ben]

I've attached an update to your spreadsheet. This shows (I hope/think) what wires from the R1 are going into the instrument cluster. I guess the next step find the equivalent wires on the Fazer wiring diagram.

[Jbizzle]

I've attached an update to your spreadsheet. This shows (I hope/think) what wires from the R1 are going into the instrument cluster. I guess the next step find the equivalent wires on the Fazer wiring diagram.

Ben, mate you're a legend.


I will give it a crack in the next month or so.