Renthal bars

[fatbloke62]

Hi ,i know the renthal 758 bars seem to be the most popular choice for the gen1, 1000 , has anyone fitted 754 bars ? , are there any issues with these regarding cable and brake line length or any fouling on the fairing

[Trebus]

754s on mine which fit fine with standard length cables / hoses. I have GTYR risers though which are a bit lower than standard.

[fatbloke62]

Cheers trebus ,its time for me to go slightly higher for the ride comfort

[Trebus]

I’ll try and take a picture tomorrow.

[robbo]

Cheers trebus ,its time for me to go slightly higher for the ride comfort

If you're happy with the hand position on your current bars, why not just get a set of bar risers. I'd of thought 754's on stock risers would have made things a bit tight wiring harness wise, bearing in mind they're wider than stock and 35mm higher than 758's. Just a thought.

[Trebus]

Pictures as promised ?

[kebab19]

With 754s, the control cables will all stretch ok but the standard length brake hose setup might not be quite long enough. I had one inch longer braided lines which reached the M/C fine, not sure it would have with standard length hoses. 

[fatbloke62]

Thanks for the  info and replies guy's , I never considered bar risers  :groan