06-03-16, 02:56 PM
(This post was last modified: 06-03-16, 02:59 PM by Val.)
Hi All,
when using the front paddock stand, it has slipped and broke a plastic bit that is on the front axle.
Cheap paddock junk :'(
I suppose this is some kind of dust guard that sits in front of the bearing dust seal.
The problem is I cannot find that part anywhere listed neither in parts pdf or online, can you help me here with part number?
Here is a picture of the nearside with the black plastic bit in place as it should be:
![[Image: 25259373960_50a5f7fde4_h.jpg]](http://farm2.staticflickr.com/1678/25259373960_50a5f7fde4_h.jpg)
Here is a picture of the offside with the broken black plastic bit missing:
![[Image: 25436425742_2003e53733_h.jpg]](http://farm2.staticflickr.com/1635/25436425742_2003e53733_h.jpg)
BTW if you have any idea about good front paddock stand too...
Adrian Monk: Unless I'm wrong, which, you know, I'm not.
![[Image: 606131.png]](http://badges.fuelly.com/images/sig-uk/606131.png)
06-03-16, 04:01 PM
(This post was last modified: 06-03-16, 04:04 PM by Deefer666.)
All looks fine to me, one side is the speedo drive and the other is the wheel spacer, can't seem to see what you're getting at or am I missing something completely obvious?
Owner of Motorcycle Republic, Specialist in unfucking things that others have fucked up.
06-03-16, 07:37 PM
(This post was last modified: 06-03-16, 07:38 PM by celticdog.)
Treat everything in life the way a dog would- if you can't eat it or foc it, forget it.
06-03-16, 08:13 PM
(This post was last modified: 06-03-16, 08:17 PM by unfazed.)
(06-03-16, 04:01 PM)Deefer666 link Wrote: All looks fine to me, one side is the speedo drive and the other is the wheel spacer, can't seem to see what you're getting at or am I missing something completely obvious?
:agree Lost me also,
How about a picture of the actual thing you broke? The only plastic thing in there is the seal
(06-03-16, 08:13 PM)unfazed link Wrote: [quote author=Deefer666 link=topic=19540.msg226126#msg226126 date=1457276478]
All looks fine to me, one side is the speedo drive and the other is the wheel spacer, can't seem to see what you're getting at or am I missing something completely obvious?
:agree Lost me also,
How about a picture of the actual thing you broke? The only plastic thing in there is the seal
[/quote]
Here is the broken plastic:
![[Image: 25567096665_c8d0f8baa4_c.jpg]](http://farm2.staticflickr.com/1587/25567096665_c8d0f8baa4_c.jpg)
![[Image: 25540942446_aa30141c7a_c.jpg]](http://farm2.staticflickr.com/1501/25540942446_aa30141c7a_c.jpg)
It sits here on the front axle between the fork and the bearing seal:
![[Image: 25436425742_b474957a2f_c.jpg]](http://farm2.staticflickr.com/1635/25436425742_b474957a2f_c.jpg)
Adrian Monk: Unless I'm wrong, which, you know, I'm not.
Baffled
Owner of Motorcycle Republic, Specialist in unfucking things that others have fucked up.
As everybody else has said have no idea where that,s come from as our bikes don't have that piece between the fork & wheel, I have a 1998 model & the front wheel has never been taken out. It looks more like some type of clip rather than a spacer as it's not completely round.
Are your sure it is not part of the paddock stand, never saw anything like that on the Fazer
07-03-16, 12:31 AM
(This post was last modified: 07-03-16, 12:32 AM by bandit.)
Unfazed, you are right it's off the paddock stand I knew i'd seen that clip some where see pick,
http://www.demon-tweeks.co.uk/motorcycle...dock-stand
(07-03-16, 12:18 AM)unfazed link Wrote: Are your sure it is not part of the paddock stand, never saw anything like that on the Fazer
Thank you well spotted.
Am I stupid :'(
Adrian Monk: Unless I'm wrong, which, you know, I'm not.
(07-03-16, 01:48 PM)Val link Wrote: [quote author=unfazed link=topic=19540.msg226174#msg226174 date=1457306308]
Are your sure it is not part of the paddock stand, never saw anything like that on the Fazer
Thank you well spotted.
Am I stupid :'(
[/quote]
My goodness no your not, but two short planks come to mind :lol :lol :lol
|
