Fazer Owners Club - Unofficial
plastic bit part number? - Printable Version

+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78)
+--- Thread: plastic bit part number? (/showthread.php?tid=75104)

plastic bit part number? - Val - 06-03-16

Hi All,

when using the front paddock stand, it has slipped and broke a plastic bit that is on the front axle.

Cheap paddock junk  :'(

I suppose this is some kind of dust guard that sits in front of the bearing dust seal.

The problem is I cannot find that part anywhere listed neither in parts pdf or online, can you help me here with part number?

Here is a picture of the nearside with the black plastic bit in place as it should be:

[Image: 25259373960_50a5f7fde4_h.jpg]

Here is a picture of the offside with the broken black plastic bit missing:

[Image: 25436425742_2003e53733_h.jpg]

BTW if you have any idea about good front paddock stand too...

Re: plastic bit part number? - Deefer666 - 06-03-16

All looks fine to me, one side is the speedo drive and the other is the wheel spacer, can't seem to see what you're getting at or am I missing something completely obvious?



Re: plastic bit part number? - celticdog - 06-03-16


https://www.yamahamotorcyclespares.co.uk/genuineparts/9796/29/yamaha%20fzs600%20fazer/front%20wheel?uID=0




Re: plastic bit part number? - unfazed - 06-03-16

(06-03-16, 04:01 PM)Deefer666 link Wrote: All looks fine to me, one side is the speedo drive and the other is the wheel spacer, can't seem to see what you're getting at or am I missing something completely obvious?

:agree Lost me also,

How about a picture of the actual thing you broke? The only plastic thing in there is the seal

Re: plastic bit part number? - Val - 06-03-16

(06-03-16, 08:13 PM)unfazed link Wrote: [quote author=Deefer666 link=topic=19540.msg226126#msg226126 date=1457276478]
All looks fine to me, one side is the speedo drive and the other is the wheel spacer, can't seem to see what you're getting at or am I missing something completely obvious?

:agree Lost me also,

How about a picture of the actual thing you broke? The only plastic thing in there is the seal
[/quote]

Here is the broken plastic:

[Image: 25567096665_c8d0f8baa4_c.jpg]

[Image: 25540942446_aa30141c7a_c.jpg]

It sits here on the front axle between the fork and the bearing seal:

[Image: 25436425742_b474957a2f_c.jpg]





Re: plastic bit part number? - Deefer666 - 06-03-16

Baffled

Re: plastic bit part number? - bandit - 06-03-16

As everybody else has said have no idea where that,s come from as our bikes don't have that piece between the fork & wheel, I have a 1998 model & the front wheel has never been taken out. It looks more like some type of clip rather than a spacer as it's not completely round.   

Re: plastic bit part number? - unfazed - 07-03-16

Are your sure it is not part of the paddock stand, never saw anything like that on the Fazer

Re: plastic bit part number? - bandit - 07-03-16

Unfazed, you are right it's off the paddock stand I knew i'd seen that clip some where see pick,


http://www.demon-tweeks.co.uk/motorcycle/front-stands/warrior-front-paddock-stand 

Re: plastic bit part number? - unfazed - 07-03-16

:thumbup

Re: plastic bit part number? - limax2 - 07-03-16

Well spotted ?

Re: plastic bit part number? - Val - 07-03-16

(07-03-16, 12:18 AM)unfazed link Wrote: Are your sure it is not part of the paddock stand, never saw anything like that on the Fazer

Thank you well spotted.

Am I stupid  :'(



Re: plastic bit part number? - unfazed - 07-03-16

(07-03-16, 01:48 PM)Val link Wrote: [quote author=unfazed link=topic=19540.msg226174#msg226174 date=1457306308]
Are your sure it is not part of the paddock stand, never saw anything like that on the Fazer

Thank you well spotted.

Am I stupid  :'(
[/quote]

My goodness no your not, but two short planks come to mind  :lol :lol :lol