Rear Caliper seal...

[anutz]

So when i took off my OEM caliper i thought it was toast....so put a 1000 caliper on it...

Now that i know a little more....or have done a lot with the front and rear braking i think it will actually be salavagable....

But i have lost a little "O" ring seal i think

Anyone know what part this is, i cannot see a caliper expanded to this level in parts catalaogs...

The seal goes i think in the recess on the second pic, of course these are the 2 "halves..." of the caliper...

[unfazed]

Someone posted this site some time ago and they do the full set of seals for the FZS600 rear caliper.

http://www.powerhouseautomotive.co.uk/co...rvices.php

[anutz]

ah never thought of checking them!!!

I shall see what they have, would be nice to get it back in working order....

[anutz]

OK so they DO have the so called 1/2 joint seals....which is good...

[celticdog]

O rings, don't you just love 'em. You compress them axially they expand radially! Have you got a pair of vernier calipers handy? It's a standard engineering part, with a bit of work you should be able to source what your after for a few bob 

[limax2]

A few years ago someone on this site said the seal for a Suzuki GS500 rear caliper was the same. Pt Number 6910734200.
Wemoto show the size as 6.5 x 11.5 x 2.2
Not used it myself so I can't confirm that info.

[anutz]

Thanks for the responses guys, so i will have a look on fleabay, will be sure to find what i need...

When i find out will let you know....i have all i need to rebuild apart from these 1/2 seals!

[Pickle]

If you are buying O-Rings on Fleabay be aware of the type of rubber for brake fluid compatibility.
Buna - NO
Nitrile-NO
EPDM - YES
AFLAS - YES

[anutz]

thanks pal....will make sure i do my research..

i picked up another rear on ebay for 10£ last night - at that price i could not pass on it - i will open that up and post pics of the seals as well..

once i am done i should have a couple of nice condition rear calipers, my old one and this one...

[paulchucky]

auntz meassure the seals with veneer gauge
let me have the size and i`ll send you some foc
i`m a plumber/boiler engineer and have 100`s ov the little rubber foccers

[anutz]

auntz meassure the seals with veneer gauge
let me have the size and i`ll send you some foc
i`m a plumber/boiler engineer and have 100`s ov the little rubber foccers

thanks, i shall do that, the 2nd caliper will be here next few days so will split it and let you know - thanks a lot!