Help..........Damper rod removal

[Rexr]

Just stripping down my gen 1 1000 forks to put in new seals and have a wee problem I can't get the damper rod out any suggestions on this would be appreciated

[fazed out]

Just stripping down my gen 1 1000 forks to put in new seals and have a wee problem I can't get the damper rod out any suggestions on this would be appreciated

  tape a 27mm socket to a piece of tube  then slide it down inside of forks after you taken spring out use a allen key at the bottom of forks  then you can undo  they arn't very tight

[Rexr]

[quote author=Rexr link=topic=16044.msg184321#msg184321 date=1424539951]
Just stripping down my gen 1 1000 forks to put in new seals and have a wee problem I can't get the damper rod out any suggestions on this would be appreciated

  tape a 27mm socket to a piece of tube  then slide it down inside of forks after you taken spring out use a allen key at the bottom of forks  then you can undo  they arn't very tight
[/quote]

Cheers will give that a go in the morning....

[Rexr]

Cheers for that Fazed-out......all sorted now......