Exup cables

[dazza]

Hello Foccer's,
Has anyone got some exup cables for sale or know of a cheaper solution to oem.
Went to 're -grease my exup today and snapped the cable just above the nipple. :'(

[devilsyam]

whoosh mite have some in his post further down

[dazza]

Cheers Luke,
Will ask him, in the meantime my local bike Shop are going to have a go at re -cabling it so fingers crossed.
The downside is I've been reduced to this. :lol

[dazza]

Does anyone know if the FZ1 cables would fit the gen 1 ?

[slappy]

Pretty certain they will not, the FZ1 ones are quite short.

[b1k3rdude]

if you have the original cables then Venhill can do you replacements..

[AyJay]

Wemoto do aftermarket replacement cables for 50 quid or so. I've been using them for the last year and they've been good. Slinkyglide is the (rather crap) name.

[b1k3rdude]

Wemoto do aftermarket replacement cables for 50 quid or so.

that price is still taking the piss though, Venhill I believe are cheaper than that.

[dazza]

Thanks for the replies fella 's,  a few options to explore there for the future.
Local mechanic put a new cable in and soldered a nipple on the end so will see how it holds up.

[ghostbiker]

Just fitted a set of the Wemoto ones. One of mine was very worn, other is looking good.
held up so far but only done a few 100 miles on it so far. Looked ok though.
only slight problem was one end was a little rough. 2 mins with emery paper and all is fitting well.

[AyJay]

They're ok. The paint on the adjusters soon get a bit of surface rust but I've done about 20k on them so far and they're working fine, so they'll last.

[Davebo]

Venhill supply an inner cables set for about a tenner. Feed 'em through the existing outers (assuming they're ok), attach the included nipples and Bob's your uncle.