New Here!

[BSR67]

Welcome to the Forums!

Unfortunately Givi has, as far as I'm aware, stopped making pannier racks for older Fazers (certainly up as far as the FZ6) presumably because it wasn't worthwhile any more

Your best bet is probably to try to find a set from bike breakers unless you're into fabricating them yourself.

Thank you Grahamm. Interestingly there is a chap in Ukraine who manufacturers welded sets that take Givi fitments. About £289 shipped so will likely go down that route in time. Feels good to support business over there too.

I checked the Givi site and indeed, NLA. They don't even do a tank log ring for the tank bags now but I think the cap is the same as a FZ1 so that kit is available.

I pick up this evening so will post first impressions on here.

Has any one ever fitted a 4XV ECM? Does it work/enhance performance?

Thanks

BSR67

---

Welcome, lots of knowledge on here although fairly quiet these days. 

The racks pop up on eBay from time to time. Hopefully your new machine has had some suspension pennies spent already but if not you might need to look at a shock and / or fork work.

Thanks Trebus

Hmmm not sure about suspension mods - all looks very standard to me. The current owner has owned it for 8 years and used it for commuting to and from work. Done quite a few miles - 57k. Carbs have been fully rebuild with new o-rings and seals. Fingers crossed.

Will post some pictures tomorrow!

Thanks

BSR67