16-10-24, 11:26 AM
Also meant to add i changed the flasher relay for a no load dead easy and simple, i purchased from sportsbike shop, (Bike It was the name on the relay) i ordered the type with connecter fitted, so was as easy as remove the left side panel on my bike 2001 just an allen screw and rubber clips.
Flasher relay is held in rubber housing and clips into the socket. unclip the socket and slide the relay with the rubber casing upwards to remove.
Take the rubber off the old relay fit round the new one.
Connect the trailing lead into connector on the bike slide the relay with the rubber cover back onto clip it came off.
Refit side pane.
Job done!
Flasher relay is held in rubber housing and clips into the socket. unclip the socket and slide the relay with the rubber casing upwards to remove.
Take the rubber off the old relay fit round the new one.
Connect the trailing lead into connector on the bike slide the relay with the rubber cover back onto clip it came off.
Refit side pane.
Job done!