10-03-23, 02:52 AM
I have compared the idle jet with others, and they are the same. I even swapped them.
I have swapped HT leads with 2 and 3 cylinder, new spark plug, new cap plug. Still the same.
So I got Compression, I got Spark, I think I only miss fuel on idle. The bikes run fine on a high rpms, its just that 3rd cylinder is not idling.
The pilot jet screw on that 3rd cylinder was a bit higher when fully seated, maybe that could be an issue, I have added half turn more on that one and will test it today.
Also next to a Pilot jet screw, there is something blanked off next to it. What's that?
One one of the videos someone said to remove the blanks when cleaning.