Hello,
There are 2 holes in front of the carb, is there a screw or jet that could be blocked? As the 3rd cylinder is cold at idle, but it's fine when going above 5000rpm.
I did rebuild the carbs, but not sure if I've seen a screw in one of those holes. Will have to take the carbs out again :rolleyes
https://youtu.be/I0siKsK6CfM?t=116
Just found a video and looks like that could be the issue.
Thanks
![[Image: 330969354_179786358180984_14831966588996...e=642F51F7]](https://scontent.fbhx4-2.fna.fbcdn.net/v/t1.15752-9/330969354_179786358180984_1483196658899607800_n.png?_nc_cat=101&ccb=1-7&_nc_sid=ae9488&_nc_ohc=kQBFmfUzzCcAX_FcH0e&_nc_ht=scontent.fbhx4-2.fna&oh=03_AdQtmvp2nhGh1V7-KivVUBAE4QCEelOdSmlPyNNyfXWc2Q&oe=642F51F7)
There are 2 holes in front of the carb, is there a screw or jet that could be blocked? As the 3rd cylinder is cold at idle, but it's fine when going above 5000rpm.
I did rebuild the carbs, but not sure if I've seen a screw in one of those holes. Will have to take the carbs out again :rolleyes
https://youtu.be/I0siKsK6CfM?t=116
Just found a video and looks like that could be the issue.
Thanks