17-09-21, 08:40 AM
I’ve just done mine and used the cheap set, just watch the sealing ring as the quality can be a bit sus but nothing a bit of sealant won’t help with. Mine were really bad and one had been squashed and pushed over by the carbs (must have been fitted wrong) so was sucking a lot of air-once I did them the bike ran much better.
Very tight and fiddly job though, I loosened the air box and slid it and the carbs back so you have about 15-20 mm of room ??
Very tight and fiddly job though, I loosened the air box and slid it and the carbs back so you have about 15-20 mm of room ??