Pilot screw adjusting tool

[limax2]

If you have ever adjusted the carburettor pilot screws on the 600 Fazer you will know how restricted the space is on number 3 carb. If you have dainty fingers you might be able to use a very short screwdriver, but I can't. You can buy a bent tool for £18 which is probably good for most bikes but which I found possible but tricky to use on number 3 carb on the 600 Fazer. There is also a much more expensive tool available that uses a pair of small bevel gears and would no doubt do the job well. After seeing a similar idea to this on another forum this is a tool I made using an angled screwdriver from Toolstation for £6.59 and which makes the job a lot easier. Very pleased with the end result which makes the adjustment easy. The chrome extension tube was something I had lying about from some scrapped item.
[smg id=3510]
[smg id=3511]
[smg id=3509]
[smg id=3512]