Pilot screw adjusting tool - Printable Version +- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb) +-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66) +--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78) +--- Thread: Pilot screw adjusting tool (/showthread.php?tid=82412)

Pilot screw adjusting tool - limax2 - 12-05-21 If you have ever adjusted the carburettor pilot screws on the 600 Fazer you will know how restricted the space is on number 3 carb. If you have dainty fingers you might be able to use a very short screwdriver, but I can't. You can buy a bent tool for £18 which is probably good for most bikes but which I found possible but tricky to use on number 3 carb on the 600 Fazer. There is also a much more expensive tool available that uses a pair of small bevel gears and would no doubt do the job well. After seeing a similar idea to this on another forum this is a tool I made using an angled screwdriver from Toolstation for £6.59 and which makes the job a lot easier. Very pleased with the end result which makes the adjustment easy. The chrome extension tube was something I had lying about from some scrapped item. [smg id=3510] [smg id=3511] [smg id=3509] [smg id=3512] Re: Pilot screw adjusting tool - BBROWN1664 - 13-05-21 or a set of these https://www.amazon.co.uk/Amtech-L3700-Offset-Screwdriver-3-Piece/dp/B00AMFIRGM/ref=asc_df_B00AMFIRGM/?tag=googshopuk-21&linkCode=df0&hvadid=222086461140&hvpos=&hvnetw=g&hvrand=5420455538698498754&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1006661&hvtargid=pla-420785560946&psc=1 Re: Pilot screw adjusting tool - b1k3rdude - 14-05-21 I have this one, but the price has gone up massively since I bought it - - https://www.amazon.co.uk/Carburetor-Adjustment-Wrench-Degree-Screwdriver/dp/B07WFC3M56?psc=1 But it can be found on Aliexpress for closer to what I paid - - https://www.aliexpress.com/item/32810165675.html Re: Pilot screw adjusting tool - BBROWN1664 - 14-05-21 Something like this is ideal https://www.amazon.co.uk/Vakki-Extension-Screwdriver-Attachment-Workspace/dp/B01MRXOQF5/ref=sr_1_12?dchild=1&keywords=90+degree+bevel+screwdriver+angle&qid=1620988691&s=diy&sr=1-12 It looks so good, I have just ordered one. Re: Pilot screw adjusting tool - limax2 - 14-05-21 b1k3rdude. I do like nice tools and that certainly looks a handy piece of kit. BBROWN1664. That angle screw driver is the same as what I used except I got the one with a longer body and drive shaft. But then I extended it further with a piece of tube etc. to make it easier to use and because I just like making such things.