Rear Brake refurb

[fazersharp]

Push the pistons right back into the caliper, fill the master cylinder reservoir, open the rear bleed nipple wait for the fluid to drain out, close it, open front, repeat as for the rear, all the time keeping the reservoir topped.  Sometimes you have to pump the peddle a few times, do it slowly.  Now bleed as normal from the back nipple, job done.

The rears are normally very easy to bleed. 
   

"simple as that" - as he says.Looked convincing but not with a small syringe that adds air each time.

Now bleed as normal from the back nipple

Do you mean from the back one (nearest the wheel ) first then the one on the outside.