31-12-18, 12:55 PM
(31-12-18, 11:04 AM)ogri48 link Wrote: thanks mike. im going to take the carbs off again and check in a coupla weeks. When looking down the throats I could barely see the holes, even with glasses and good light. my old eyes aint all that now im older. ive ordered one of those LED lit magnifying glasses off ebay (along with a long reach 3mm t bar), and I figure now ive done it once getting the carbs on and off isn't such a big deal. Im also making up a template for the floats..i used a ruler with 14mm markd off but struggled to get a good line of sight in practice, so just want to recheck that too. im about 95% certain its ok, but I wanna be 100... :lol :lolget a thin bit of wire like a paper clip and poke it down the hole to the bottom then mark or bend it when it enters the hole. put the drill back down as far as it goes and mark where it enters the hole. you can now compare the lengths to make sure you got to the bottom.