20-12-18, 05:56 PM
I've had this a few times on my 2009 Gen 2:
Unbolt the mirror and remove the boot, take two sockets and place one each side of the thin tube that's holding the mirror assembly together and gently apply pressure in a vice to the sockets so that the tube is lightly compressed (ie the sockets need to be sized so that are bearing on the rim of the tube).
Might take a couple of goes
Then re-assemble and check it's wobble free. If not repeat.
Hope it works
Unbolt the mirror and remove the boot, take two sockets and place one each side of the thin tube that's holding the mirror assembly together and gently apply pressure in a vice to the sockets so that the tube is lightly compressed (ie the sockets need to be sized so that are bearing on the rim of the tube).
Might take a couple of goes
Then re-assemble and check it's wobble free. If not repeat.
Hope it works