Clutch biting point issue, worn clutch basket?

[b1k3rdude]

Check the pivot hole in the old lever you removed and see if it has elongated.

Hole was fine

• Sounds like the cheap levers to me.
  
• The only way to know for sure is to swap the clutch lever back and see if the problem occurs immediately.
  

• Theap, but the only issue can see with them is that the lever dimensions are off, as in the lever is too close to the bar depending on the span/cable adjustment.
  
• See my post above, better span adjustable levers have pretty much fixed the issue, so I dont need to waste time swapping the oem lever back.
  

@Gnasher, I should also mention I have canted the lever assy up a tad so it makes grabbing the lever a bit easier.