(03-06-18, 12:22 PM)b1k3rdude link Wrote: I'm going to check the arm and see if there is any freeplay in the arm-shaft bearing.
- Cable moves freely, with a little friction - so lubed.
- Clutch shaft arm dosen't show any signs of cracking.
- The above arm has a little freeplay vertically that can be heard but not seen.
- The Clutch shaft has a little lateral freeplay, but again that can be heard but not seen.
- With the cable unattached, the above shaft moves freely & smoothly.
- With the cable not attached, pressing the arm against the pull-rod with my thumb - I can begin to fee the tension of the clutch springs.
- I had a spare 'better qaulity' set of span adjustable levers in the cupboard so swapped those with the cheaper chinese ones (that were still fine and had no wear) - thre idea being that maybe the tolerances on the pivot and distance form bar maybe better.
I put the 3mm play back on the lever, and will test in the way to and from work tomoz.
