01-06-18, 09:41 AM
(31-05-18, 06:18 PM)b1k3rdude link Wrote:
- In what way, should there be a specific amount of cable from the end of the adjuster bolt and the arm? to change position of the arm pivot position?
- I assume I can only do this with the cover off? and assuming that what am looking for other than bearing wear and play..?
The fact you can't get enough free play at the bar is an indication something is wrong. You need to check the operation of the cable, all the adjusters and the clutch release mechanism from one end to the other. Slacken off the lever adjuster and see if the cable is moving freely, then check the arm pivot for movement/operation. It's possible the cable is dry/damaged/out of adjustment and now over stretched and in need of replacement. If all's well with all the above you then need to start digging into the clutch it's self.
Later