|
borken caliper bleed nipple
|
26-05-18, 02:53 PM
(26-05-18, 02:28 PM)psyfi_1 link Wrote: undoing Ok it's very likely the nipple was over tightened by whomever work on the caliper before you. As mentioned above an ez out will normally work, when I've done them I use a bit of heat on the caliper body around the nipple just a butane gas torch for a about 30 seconds and out they come. You only need 6Nm or 4.5 Ft- lbs.
Later
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
borken caliper bleed nipple - by psyfi_1 - 08-05-18, 02:44 PM
Re: borken caliper bleed nipple - by andybesy - 08-05-18, 03:23 PM
Re: borken caliper bleed nipple - by andybesy - 08-05-18, 03:25 PM
Re: borken caliper bleed nipple - by psyfi_1 - 08-05-18, 03:35 PM
Re: borken caliper bleed nipple - by BBROWN1664 - 08-05-18, 04:54 PM
Re: borken caliper bleed nipple - by psyfi_1 - 08-05-18, 05:44 PM
Re: borken caliper bleed nipple - by daviee - 08-05-18, 06:03 PM
Re: borken caliper bleed nipple - by Trebus - 08-05-18, 08:26 PM
Re: borken caliper bleed nipple - by psyfi_1 - 14-05-18, 01:58 AM
Re: borken caliper bleed nipple - by Gnasher - 15-05-18, 10:03 PM
Re: borken caliper bleed nipple - by psyfi_1 - 26-05-18, 02:08 PM
Re: borken caliper bleed nipple - by Gnasher - 26-05-18, 02:24 PM
Re: borken caliper bleed nipple - by psyfi_1 - 26-05-18, 02:28 PM
Re: borken caliper bleed nipple - by Gnasher - 26-05-18, 02:53 PM
|
