06-05-18, 08:58 PM
Fazer 1000 front should be (58W) ... these are listed as (61W) front fitment, so it's a heavier construction, would likely be too stiff a tyre & not really suitable for a Fazer 1000, probably better suited to a Pan 1300 or similar weight bike.
Old technology by today's standards, will likely be old stock, if you intend on trying a a pair, I'd advise ring em 1st to confirm build date on sidewall, remember all rubber products have a shelf life of approx 5-6yrs, then it perishes.
I tried a pair on my old CBR600F3 about 6yrs ago, grip well in the dry, slide all over the shop in the wet, ripped em to bits inside 3,000mls.
They're cheap for a reason.
Old technology by today's standards, will likely be old stock, if you intend on trying a a pair, I'd advise ring em 1st to confirm build date on sidewall, remember all rubber products have a shelf life of approx 5-6yrs, then it perishes.
I tried a pair on my old CBR600F3 about 6yrs ago, grip well in the dry, slide all over the shop in the wet, ripped em to bits inside 3,000mls.
They're cheap for a reason.