08-12-17, 01:31 PM
(07-12-17, 11:42 PM)Fazerider link Wrote: (Apologies Disorderlypunk, I didn’t notice you’d already made the point about the drain hole.)
The innards of the silencer are mild steel and rot through at the base so the gases can blow out of the gap around the pipe where it enters the stainless can. You may be able to bodge it by squishing in as much high temperature silicone sealant as possible. I got a couple of extra years life out of mine that way.
Having said that, I doubt it’s the cause of your running issue which sounds much more like an electrical problem to me.
What should I look at electrically, like the ECU and fuses? The bike does want to start though indoors, but is very hesitant in the cold like it's stalling and putting out a couple of rpm. Wouldn't an electrical fault prevent bump starts too?
Living life a corner at a time~