Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fork Seals..with video
#12
So closer look at the stanchons, lots of wear and scoring on them, vertically, so assume the bush has worn, both are the same, so looks like i will need new ones, no point with doing it with these, as i doubt they will seal properly again, i can feel the grain with my fingernails, so its not ideal...


any ideas on the stanchions, can see its going to be a 200$ job as each one looks like 110 on the bay...


this bike is costing me an arm and a leg lol, and teaching me a few lessons.
Reply


Messages In This Thread
Fork Seals..with video - by anutz - 22-09-17, 04:07 PM
Re: Fork Seals.. - by SkidT - 22-09-17, 04:32 PM
Re: Fork Seals.. - by cl1ve2004 - 22-09-17, 05:28 PM
Re: Fork Seals.. - by ram - 22-09-17, 05:30 PM
Re: Fork Seals.. - by anutz - 24-09-17, 12:09 AM
Re: Fork Seals.. - by Hugh Mungus - 24-09-17, 06:28 AM
Re: Fork Seals.. - by Falcon 269 - 24-09-17, 10:13 AM
Re: Fork Seals.. - by anutz - 24-09-17, 12:23 PM
Re: Fork Seals.. - by anutz - 24-09-17, 01:34 PM
Re: Fork Seals.. - by Falcon 269 - 24-09-17, 02:58 PM
Re: Fork Seals.. - by anutz - 24-09-17, 03:44 PM
Re: Fork Seals.. - by anutz - 24-09-17, 04:26 PM
Re: Fork Seals.. - by anutz - 24-09-17, 05:51 PM
Re: Fork Seals..with video - by SkidT - 24-09-17, 09:49 PM
Re: Fork Seals..with video - by anutz - 24-09-17, 11:11 PM
Re: Fork Seals..with video - by anutz - 24-09-17, 11:46 PM
Re: Fork Seals..with video - by old son - 25-09-17, 06:43 AM
Re: Fork Seals..with video - by anutz - 25-09-17, 09:37 AM
Re: Fork Seals..with video - by old son - 25-09-17, 12:56 PM
Re: Fork Seals..with video - by anutz - 25-09-17, 07:02 PM
Re: Fork Seals..with video - by Spannerhands - 26-09-17, 11:30 AM
Re: Fork Seals..with video - by anutz - 03-10-17, 05:54 PM
Re: Fork Seals..with video - by anutz - 12-10-17, 10:16 PM
Re: Fork Seals..with video - by anutz - 12-10-17, 11:16 PM
Re: Fork Seals..with video - by anutz - 14-10-17, 03:39 PM
Re: Fork Seals..with video - by anutz - 17-10-17, 11:22 AM

Forum Jump:


Users browsing this thread: