11-09-17, 03:03 PM
I only removed mine last week, very straight forward really, just trace the wires from the alarm and into the bikes wiring loom, then remove the
black wires from the loom. there will be two wires in the loom you will need to reconnect, these are what creates the immobilising side of the alarm.
The other wires are for the indicators and are only attached to the side of the loom wires, these I just cut the black wires off with out cutting the loom
and them tapped over. Then just re tape the loom back making sure the bike starts first.
black wires from the loom. there will be two wires in the loom you will need to reconnect, these are what creates the immobilising side of the alarm.
The other wires are for the indicators and are only attached to the side of the loom wires, these I just cut the black wires off with out cutting the loom
and them tapped over. Then just re tape the loom back making sure the bike starts first.