17-08-17, 11:38 PM
1 marked LH indicator not connected Connected to the alarm via diode. Allows the indicators to flash when alarm activated,
1 marked RH indicator not connected Connected to the alarm via diode Allows the indicators to flash when alarm activated
2 wires joined marked clutch circuit Name doesnt sound right usually the kill switch or side stand switch circuits
2 wire joined marked starter circuit Sounds right disables the starting circuit
1 marked earth not connected Earth for alarm
1 marked +12V not connected Could be the switched 12v or pernament 12v for the alarm Check if this remains on if Ignition switch is off
1 unmarked Could be the switched 12v or pernament 12v for the alarm Check this to see what it is.
Diode prevents back feeding to the alarm when Indicators are operated normally.