According to the FZ1-S/ FZ1-SA owner's manual " The shock absorber assembly is equiped with a spring preload adjusting ring and a rebound damping force adjusting screw." Preload is on the top of the spring and the rebound damper screw is below the spring (there is no compression damping adjuster).
Probably wrong but I can't think of any reason why you can't fit the shock upside down though- Ducati have the shock almost horizontal. It may even run cooler with the damping further away from the exhaust...
Rob
Probably wrong but I can't think of any reason why you can't fit the shock upside down though- Ducati have the shock almost horizontal. It may even run cooler with the damping further away from the exhaust...
Rob