Hagon progressives were they fitted correctly/ handling nightmares

[tommyardin]

Also Aftermarket springs are not always the exact same length as the original springs, if they are longer than the originals then the tube spacers needs to be cut down accordingly, if they are shorter you need to add 35 MM Penny washers to the top of the spring to make up that shortfall, remembering to place the solid disk washer type spacer at the top for pre-load contact.


Below is a link for the correct sized Penny Washers.  35 mm washers with a 12 mm hole


http://www.ebay.co.uk/itm/181741976153?_...EBIDX%3AIT