Bearing is 60/28 C3 2RS
Seal is 35mm x 52mm x 8mm (unsprung)
The OEM Chain and Sprocket Kit part number is 5LV-W001A-01 and can be reasonably priced, the only down side is that the swinging arm has to come off to fit it as it is an endless chain.
However I find it worthwhile as it allows me inspect and grease linkage and swinging arm bearings at the same time.
! NOTE: If you do the bearing yourself be aware it has a circlip holding it in and is between the seal and the bearing !
Seal is 35mm x 52mm x 8mm (unsprung)
The OEM Chain and Sprocket Kit part number is 5LV-W001A-01 and can be reasonably priced, the only down side is that the swinging arm has to come off to fit it as it is an endless chain.
However I find it worthwhile as it allows me inspect and grease linkage and swinging arm bearings at the same time.
! NOTE: If you do the bearing yourself be aware it has a circlip holding it in and is between the seal and the bearing !