16-08-16, 08:59 AM
There is a wiring diagram in the service manual available on here in the downloads section.
http://foc-u.co.uk/index.php?action=down...file&id=11
I had the same problem as you and found that the previous owner had removed an alarm. The 12v feed wire had just been twisted together and over time had come apart (this was under the left side infill below the seat), soldered it up and all is well.
http://foc-u.co.uk/index.php?action=down...file&id=11
I had the same problem as you and found that the previous owner had removed an alarm. The 12v feed wire had just been twisted together and over time had come apart (this was under the left side infill below the seat), soldered it up and all is well.
Intentionally left blank