10-03-16, 07:22 PM
http://foc-u.co.uk/index.php?action=down...nfile&id=8
Think I've found it.
Section 8 on the down load is electrics, checkout section within for starting circuit. Starter relay (7) and safety cut out relay (9) have a Blue/White wire connecting them and a Black (Earth?) going into the relay. To test for continuity you put 12v to Red/Black and Black/Yellow with the circuit tester on L/W B and if alls well you should have made the circuit. So forget the black on the relay (just confusing the issue) how about connecting L/W from the starter relay to L/W at the starter switch (55)
I know there are other issues with bypassing the relay but for now I just want thoughts on whether this would complete the starting circuit
Think I've found it.
Section 8 on the down load is electrics, checkout section within for starting circuit. Starter relay (7) and safety cut out relay (9) have a Blue/White wire connecting them and a Black (Earth?) going into the relay. To test for continuity you put 12v to Red/Black and Black/Yellow with the circuit tester on L/W B and if alls well you should have made the circuit. So forget the black on the relay (just confusing the issue) how about connecting L/W from the starter relay to L/W at the starter switch (55)
I know there are other issues with bypassing the relay but for now I just want thoughts on whether this would complete the starting circuit
Complete fabrication, I didn't make it up!