Headlights Opposites

[Val]

Okay so, switch in dipped position is high beam only, switch in high beam position is dipped and high beam.
Thanks
Alex

Hi Alex,

Looking at the wiring diagram looks to me the leads for high and dipped are switched in your headlight secondary relay.

According to the wiring diagram the Headlight secondary relay has 5 wires. 2 black and 1 yellow, 1 black/yellow for the high beam and one black/blue for the dipped beam coming from the primary headlight relay.

Find it and replace the places for black/yellow and black/blue wires there.

EDIT: that cannot happen the wires are connected to the secondary headlight relay via socket. I doubt somebody has played with the socket.
Unless somebody has managed to plug the socket the wrong way  :eek

The relay may be faulty? There is a procedure in  Haynes to check the relay. Headlight relays are under the instrument cluster.

I am in Bracknell by the way and off work this whole week so feel free to PM me and come here for troubleshooting session at my garage. I do have printed Haynes manual and it has your bike wiring diagram.

Or you can just pop up here and borrow the manual from me if you prefer to check that yourself later in peace

cheers
Val