K-tech spring kit for the FZS1000 - addition info req.

[b1k3rdude]

So got an update from k-tech -

• Static Sag - Ideally one should check the sag with and without rider, 25-30mm without rider and 35-45mm with rider
  
• Comp & Reb - set the compression adjuster (bottom) to three or four clicks out and the rebound adjuster to eight clicks out.
  

Will have to measure the sag over the weekend, but the above comp setting is nuts. At stock of 6-clicks out its too harsh as it is, but their reb. setting is only 1-click softer than stock.