02-07-15, 07:56 AM
The can you have looks like it could be made by Dominator exhausts in Poland. Although it is hard to tell.
https://www.facebook.com/115917925244539...=1&theater
The SP Engineering ones come with everything that you need, apart from the down pipe to link pipe gasket.
Here is the ebay listing for the pipe I have. (They have used a photo of my bike in the listing) You can see there is loads of room for the footpeg.
http://www.ebay.co.uk/itm/Yamaha-FZS600-...418f997b45
Your stainless down pipes are a 4 into 1. I wouldn't worry too much about what side of the mounting the downpipe bracket sits as long as there is no undue stress on the pipes.
You could hammer a dent in it if you want, but if you are as OCD as you say, you will always know that it is dented and not right!
https://www.facebook.com/115917925244539...=1&theater
The SP Engineering ones come with everything that you need, apart from the down pipe to link pipe gasket.
Here is the ebay listing for the pipe I have. (They have used a photo of my bike in the listing) You can see there is loads of room for the footpeg.
http://www.ebay.co.uk/itm/Yamaha-FZS600-...418f997b45
Your stainless down pipes are a 4 into 1. I wouldn't worry too much about what side of the mounting the downpipe bracket sits as long as there is no undue stress on the pipes.
You could hammer a dent in it if you want, but if you are as OCD as you say, you will always know that it is dented and not right!
People who think they know everything are a great annoyance to those of us who do.