30-04-15, 07:50 PM
this is my way works for me there may be other ways
if the adjuster is solid as this welsh won was after a winters riding DONT force it
do as this picture
[img height=456 width=251]https://scontent-lhr.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10407968_10152995476353800_8859166205615816412_n.jpg?oh=638227d90e481372620fc09100ef4466&oe=559A42DD[/img]
any bit hose will do fill with penatrating fluid and leave 24 48 hours
then gently see if any movment make sure screwdriver is correct for slot or you will foc it
work back and forward gently if still rock solid leave bit longer and repeat
last resort
the ring around the adjuster is ally gently heat with paint stripper you will no when hot enough as fluid will fizz up whilst hot spray pen fliud and leave to cool
luke
if the adjuster is solid as this welsh won was after a winters riding DONT force it
do as this picture
[img height=456 width=251]https://scontent-lhr.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10407968_10152995476353800_8859166205615816412_n.jpg?oh=638227d90e481372620fc09100ef4466&oe=559A42DD[/img]
any bit hose will do fill with penatrating fluid and leave 24 48 hours
then gently see if any movment make sure screwdriver is correct for slot or you will foc it
work back and forward gently if still rock solid leave bit longer and repeat
last resort
the ring around the adjuster is ally gently heat with paint stripper you will no when hot enough as fluid will fizz up whilst hot spray pen fliud and leave to cool
luke
www.Devilsyam.com (Fazerpedia)